63
Manual operation
If the adaptation run is to be restarted at all hea-
ting zones, you can also use the channel button
to select all channels (keep pressing until all
channels appear in the display) and keep pressing
the select key until the open-end wrench appears
at heating zone „1“ in the display.
To open or close a heating zone manually, proceed as
follows:
• Select the required channel using the channel
button
(D)
(
see figure 7
).
• Press the select button
(C)
briefly (
see figure 7
).
The heating zone now opens or closes the valve of the
heating zone for 15 minutes. Afterwards, normal operati-
on continues for the heating zone.
If the valves of all heating zones are to be opened
or closed simultaneously, select all channels and
press the select key
(C)
briefly.
Содержание HmIP-FALMOT-C12
Страница 3: ...1 A B G E D C F I H J 1 2 3 4 5 6 7 8 9 10 11 12 ...
Страница 4: ...2 3 120 mm K L N M ...
Страница 5: ...4 5 ...
Страница 6: ...6 7 Channeltaste drücken Selecttaste drücken press channel button press select button ...
