PL
7
V OPIS PRODUKTU (rys. A)
1. Popychacz
8a. Gumowa wkładka
2. Pokrywa
9. Mikro wyłącznik bezpieczeństwa
2a. Wypustka pokrywy
10. Włącznik (On, Off, R)
3. Ślimak
11. Korpus urządzenia
4. Filtr
12. Trzpień wału napędowego
5. Obrotowa podstawa filtra
13. Dzbanek na miąższ
6. Pojemnik soku
14. Dzbanek na sok
7. Otwór wylotowy miąższu
15. Szczotka do czyszczenia
8. Otwór wylotowy soku z zatyczką
VI MONTAŻ
Przed pierwszym użyciem wyciskarki należy:
– dokładnie zapoznać się z treścią niniejszej instrukcji,
– należy usunąć wszelkie elementy opakowania i sprawdzić jego zawartość,
– upewnić się, czy żaden z elementów nie jest uszkodzony,
– dokładnie umyć elementy, które mają kontakt z żywnością,
– złożyć urządzenie.
MONTAŻ URZĄDZENIA (rys. B,C)
– upewnić się, że gumowa wkładka (8a) znajdująca się na spodzie pojemnika (6) jest wsunięta
(rys. B),
– umieścić pojemnik soku (6) na korpusie (11) i przekręcić w prawo (rys. C1),
– w pojemniku soku (6) umieścić kolejno: podstawę filtra (5), wybrany filtr (4) oraz ślimak (3)
(rys. C2), należy zwrócić uwagę na prawidłowe ułożenie elementów (rys C3),
– znak
▼
na filtrze (4) zrównać się ze znakiem
▲
na korpusie urządzenia (11) (rys C4),
– ustawić dzbanki (13, 14) pod otworami wylotowymi (7, 8),
– nałożyć pokrywę (2) i przekręcić w prawo (rys. C5),
– wsunąć popychacz (1) do tunelu dozującego w pokrywie (2),
– podłącz wtyk urządzenia do sieci elektrycznej (rys. C6).
MONTAŻ URZĄDZENIA (film instruktażowy) dostępny na:
https://www.youtube.com/watch?v=guNUmTV1-A8
https://www.youtube.com/watch?v=BftgJBhng8c