30
My appliance isn’t working correctly
o
The cooking zones are not functioning or will not switch on.
*
It has been more than 2 minutes since a zone was switched on.
You should switch on the hob and select a cooking zone again.
*
The safety lock has been switched on (see the “Locking the hob
top” section for information on how to turn off the safety lock).
*
Several cooking zone selection buttons have been pressed at once.
You should only touch one cooking zone selection button at once.
*
The safety cut out has been triggered. Press a cooking zone
selection button to reset the hob.
*
Check that the mains electrical supply to the appliance is correct
and working. Check the mains fuse.
*
The pans that you are using are not suitable for use on an induction
hob.
o
The residual heat indicator has not come on after I have
switched a cooking zone off.
*
The cooking zone has only been turned on for a short period of
time; therefore it did not go above 55°C.
*
IMPORTANT: If the cooking zone does appear to be hotter than
55°C and the residual heat indicator has not come on, you should
call the Homeking Advice Line.
o
A humming sound is heard when a cooking zone is selected.
*
This is normal; the sound will disappear when the zone heats up.
o
The cooking zones have become discoloured.
*
This maybe caused by burnt on remnants of food. This will not
affect the working of the appliance. However you should make sure
that the cleaning instructions are being followed regularly.
o
Only two of the zones on my hob are working
*
You should recheck that the terminal screws are all fully tightened
between the links.
