26
npacking the appliance
e check that the following items
re contained within the packaging:-
nstruction manual
Fixing screws
le in the worktop that corresponds with the drawing shown
above.
hob
into position (see drawing opposite).
upside down and place
it on a cushioned mat.
future, particularly if it needs
to be serviced.
U
When unpacking the appliance pleas
a
1 Hob
1 Installation and i
1 Guarantee card
4 Fixing brackets
4
Installing the appliance
o
Cut a ho
o
IMPORTANT: There are ventilation holes
around the outside of the hob. YOU MUST
ensure that these holes are not blocked
by the work top, when you put the
o
Carefully turn the hob
o
IMPORTANT: Do not use a silicon sealant to
seal the appliance against the aperture. This
will make it difficult to remove the hob from
the aperture in
