12
ouch controls
ans of the touch controls that
can be found on the control panel.
o
Each touch control has a visual display that corresponds to it.
alibration of touch controls
ser interface and the control
panel will need to be re-calibrated.
k button (2), the hob will
calibrate the touch control sensitivity.
finger and DO NOT use gloves when
touching the controls.
URN OFF any cooker hood
lighting when calibrating the controls.
e detected within approximately 3
seconds of initial power on.
rror code FL. The
LED displays will flash “FF” and “LL” alternately.
ately 3 seconds and then your appliance will be ready
for use.
T
o
All operations are performed by me
C
o
When the hob is powered on for the first time (or after a power
cut), it generates a reset in the u
o
The first time you touch the Safety Loc
o
In order that the hob can calibrate the control panel correctly,
you must use a clean
o
The calibration process also requires low ambient light levels in
the area of the touch controls. Please T
o
The ambient lighting will b
IMPORTANT: If during this calibration process excessive ambient
lighting is detected the control panel displays e
o
If or when there are no ambient light error codes, press the
Safety lock button to calibrate the hob controls. Wait for
approxim
