49
o
If it does, rest the bottom edge of the décor door on the plinth
and mark the part to be cut. There should be a cut out in the
plinth to provide a minimum gap of 3 mm between the bottom of
the décor door and the plinth to allow the door to move freely.
o
Remove the plinth and trim as necessary. You may wish to seal
the edges of the plinth with a suitable varnish to prevent water
ingress. Replace the plinth.
Before first use
You should check the following before using the appliance for the first
time:-
o
That the dishwasher is level and fixed in position.
o
That the water tap is fully open.
o
That there are no leaks at either end of the drain or inlet hoses.
o
That the inlet and outlet hose are fully tightened.
o
That the inlet and outlet hoses are not kinked.
o
That the power is switched on.
o
That the water softener has been filled with water and salt.
o
That the rinse aid dispenser has been filled.
