Securing the dishwasher
The dishwasher must be secured to the worktop, this can be done in
one of two ways:-
o
Standard worktop- Secure the dishwasher to the
underside of the worktop via the two fixing holes in the top
trim.
o
These screws should be fully tightened.
o
Marble/granite worktop- The material of the worktop
will mean that it is impossible to put a screw through the
underneath of the worktop.
o
Two brackets are provided to allow the appliance to be
secured to the sides of the adjacent cabinets.
o
The brackets should be secured to the appliance using the
two screws at the top of the chassis, adjusted to the
correct width and then screwed to the adjacent side panels
using suitable screws.
Installing the decorative plinth
o
A decorative plinth can be installed at the base of the dishwasher
according to the manufacturer’s instructions.
o
When the plinth is in position, slowly open the dishwasher door
to check that the door does not hit or rub against the plinth.
48
