39
rniture door is not supplied with the
appliance. You should purchase one to match with the rest of
t of 725 mm and a maximum width of 598 mm. The
maximum thickness of the furniture door should be 20
o
Use the installation template supplied with the appliance to mark
he template (A) with the top edge of the
furniture door and the left hand edge of the door in line with the
ositions for the four fixing positions with a pencil.
Repeat this step on the right hand side of the door using the
template.
f the door is
made of chip board, only drill through the veneer. If the door is
o
Attach the lower fixing brackets to the bottom part of the door.
Preparing and connecting the furniture door
o
IMPORTANT: The fu
your kitchen cabinets.
o
The maximum weight of the furniture door should be 5.5
kilograms. The furniture door should have a maximum
heigh
mm.
up and then drill out the necessary holes in the furniture door.
o
Align the top edge of t
measured door width.
o
Mark the p
o
At the eight positions marked, drill holes which are 2 mm in
diameter. Take care not to drill through the door. I
made of solid wood, the holes can be made deeper.
