5
G
B
CAUTION:
DO NOT operate the humidifier without first
soaking the wick. The humidifier wILL NOT function
without a wick.
3. Fill the water tank with clean, cool (not cold) tap water
to the MAX FILL line. DO NOT OVERFILL. we recommend
using distilled water if you live in a hard water area. Fig 5.
4. Replace the humidifier top cover by turning clockwise
until tight. Fig 6.
5. To turn on, press the ON/OFF button on the Top Cover.
The LED light will illuminate when the humidifier is ON.
NOTE:
This humidifier does not include an Auto Shut-off
when the unit runs out of water. The unit MUST be
unplugged when not in use or when the water runs out.
Fig 7.
6. Replacement wicks are available from your local HoMedics
customer service centre.
HOw TO CHANGE wICK
CAUTION:
Before changing wick, turn power off and unplug unit from the outlet.
1. Remove replacement wick from package and soak in water for 2 minutes.
2. Unlock the spring loaded wick by turning the wick holder to the left and removing
from the top cover. Fig 3.
3. Remove the old wick from the wick holder and discard.
4. Place the new, soaked wick into the wick holder.
5. Place the wick holder back on the unit and lock into place by turning the holder to the
right.
CLEANING AND CARE
CAUTION:
Before cleaning the unit, turn power off and
unplug unit from the outlet.
Tank Cleaning
Unscrew the humidifier top cover from the water reservoir
by turning the top cover counter-clockwise. Lift the top
cover off and set aside. wipe the reservoir with a soft cloth
then rinse it with clean water. Suggestion: Clean the water
tank once every two to three weeks, depending on your
water conditions. Fig 8.
Ultrasonic Nebulizer Cleaning
To clean the ultrasonic nebulizer, you must first remove the
spring loaded wick. To remove the wick, turn the top
MAX FILL
MAX FILL
MAX FILL
Fig 5
Fig 6
Fig 7
Fig 8
Fig 9
IB-HUMCM10B-0812-03_Layout 1 28/08/2012 16:53 Page 5
All manuals and user guides at all-guides.com
