6
G
B
humidifier cover over. Turn the spring loaded wick holder to
the left. Remove the spring loaded wick and set aside.
Make a solution of mild dish soap and water. Dip a soft bristle
brush into the solution and brush ultrasonic nebulizer. wipe
clean with a soft cloth. Fig 9-10.
NOTE:
DO NOT pour water into the ultrasonic nebulizer or
submerge unit in water.
Surface Cleaning
Clean the surface of the unit with a clean damp soft cloth.
Fig 11.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Power Light is off
• Unit is not plugged in
• No power at outlet or USB
port
• Computer may be in Sleep
Mode
• Plug unit in
• Push POwER button to turn
the power on
• Check circuits, fuses, try a
different outlet or USB port
• Open Computer, activate out
of Sleep Mode
Peculiar Odor
• If new unit
• If unit is in use, the odor may
be a dirty water reservoir, old
tank water or an old wick
• Open the water reservoir and
keep it in a shady and cool
place for 12 hours
• Empty the old water, clean
the reservoir and fill with
clean water
• Replace with a new wick
Excessive Noise
• Unit is not level
• Low water level
• wick was not soaked
• Place unit on a flat, even
surface
• Check the water level. Refill
the reservoir if the water is low
• Remove wick, soak for 2
minutes and replace wick
Fig 10
Fig 11
IB-HUMCM10B-0812-03_Layout 1 28/08/2012 16:53 Page 6
All manuals and user guides at all-guides.com
all-guides.com
