19
1. If the cuff is not assembled, pass the end of the cuff furthest
away from the tubing through the metal D-ring in order to form
a loop. The smooth side without the felt material should be on
the inside of the cuff loop.
2. Plug the cuff tube into the left side of the unit.
3. Open the arm cuff so that your arm may be placed through it.
4. Wrap the cuff on a bare arm or over thin clothing. Thick clothing
or a rolled up sleeve will cause inaccurate blood pressure
measurements
AR
RO
W
MUS
T
FALL
WITH
IN
BL
U
E BA
N
D
D-ring
End of cuff
ARROW MUST F
ALL
WITHIN
BLUE
BAND
Insert connector here