2
Included in the box:
Tools Needed:
1 - Slim-Line ironing board cabinet
2 - Mounting brackets
4 - Drywall anchors & Mounting Screws
1 - ironing board padded cover
• Adhesive tape
• Pencil
• Phillips Head Screwdriver
• Level (optional)
• Stud Finder (optional)
• Measuring tape (optional)
Deciding Where to Install Your New Slim-Line ironing Cabinet:
a) You need a space at least 30” wide to fully open the door.
b) The door can open to either the left or right. (Step 9 shows you how to reverse
the door.)
c) Install Slim-Line ironing board between two wall studs or straddling a single stud.
Checking for wall studs with a stud finder.
We recommend you install your ironing board mirror cabinet on a wall with standard
16” spaced studs or straddling one stud.
You’ll be using drywall anchors for the installation so mark the studs clearly to avoid
them.
Tip: If you don’t have a stud finder, you can tap along the wall & listen for a hollow
sound. That’s a space without a stud.
Step 1
Decide on the most comfortable height for your Slim-Line ironing board.
Fold the bottom edge of the template to the height you want it to be at.
Standard ironing boards are 36” from the floor. Of course, you can mount your Hide Away
Slim-Line higher or lower depending on your personal preference.
Step 2
Installation
Taping the template to the wall.
a. Tape the template bottom edge to the wall at the floor.
b. Starting at the bottom, smooth the paper up the wall.
c. Tape the sides every few inches as you go.
d. (OPTIONAL) Check that the standard ironing board height line is parallel to the floor
with a spirit level.
Tip: Leave the template up until the end of Step 7. Then you can just pull it away!
Step 3
