25
5.6 Status
5.6.1 Information
You can check system information such as; Model ID,
Hardware version and Software version in this dialog.
5.7 PVR
5.7.1 Record Setting
You can enable or disable the Time shift function in this window. You can also set a Default record
time which is used for both the time shift buffer and recording file lengths.
1.
Select the desired options with the / / /
▲ ▲ ▲ ▲
buttons.
2.
Press the
OK
button to confirm your choice, and
exit the dialog.
Hard Drive
: If this option is “on”, the hard disk is always “spun up” (i.e. operating). If
the option is “off”, the hard disk goes into sleep mode. Whenever you perform a disk-
based operation (i.e. recording or playback), the disk is spun-up. This saves
minimal
power, but it takes time for the drive to “wake from sleep”.
Time shift
: If selected “on”, the HT9200DTR will automatically record the channel being
watched (to a temporary buffer – not a file). You can pause, rewind etc. “live TV” in this
mode. If selected “off”, press the PAUSE button to activate the temporary record buffer.
Start buffer time
: You can set a default Start buffer time for recordings with this option.
End buffer time
: You can set a default End buffer time for recordings with this option.
