7
INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT - Save these instructions
for local inspector’s use.
IMPORTANT - Observe all governing codes,
ordinances, and safety regulations.
Keep these instructions for future reference.
Installation of this appliance requires basic
mechanical skills.
Installation takes approximately 1 hour.
We recommend that two people install this product.
Proper installation is the responsibility
of the consumer.
Product failure due to improper installation is not
covered under the Warranty.
You MUST use all supplied parts and use proper
installation procedures as described in these
instructions when installing this air conditioner.
Your air conditioner is designed to install in standard
double hung windows with opening widths of 23 to 36
inches.
Do not, under any circumstances, cut or remove the
third (ground) prong from the power cord.
Do not change the plug on the power cord of the air
conditioner.
Aluminum house wiring may present special problems-
consult a qualified electircian.
When handling unit, be careful to avoid cuts from sharp
metal edges and aluminum fins on front and rear coils.
Save Carton and these Installation Instructions for
future reference. The carton is the best way to store
unit during winter, or when not in use.
Screwdriver
Screwdriver
Level
Pencil
Ruler or
Tape Measure
Scissors or Knife
CAUTION
TOOLS YOU WILL NEED
TOOLS YOU MAY USE
NOTE
WINDOW REQUIREMENTS
Window
Sill
Wooden Windows
Offset
Exterior
Wall
13” min
(330 mm)
23” to 36” min
584 mm to 914mm
Inner
Interior
Wall