15
Instalación (continuación)
5
Fijar el dosel
6
Instalar las bombillas
□
Coloque el dosel (A) sobre la tornillo de montaje (BB),
y asegúrese que esté al ras del techo.
□
Atornille el tuerca de cierre (C) en el tornillo de
montaje (BB) atornille la dosel (A) en la buje del
techo.
□
Atornille tres bombillas incandescentes de base
medio de 60 Vatios máximo (vendidos por
separado) en los portalámparas (F).
NOTA:
Puedes usar las bombillas LED equivalente,
de ahorro de energía que no exceda los 8 Vatios cada
una (en venta por separado).
Mantenimiento y Limpieza
□
Limpia la lámpara con un paño suave y seco.
□
No uses limpiadores con químicos, solvents, o productos abrasivos.
PRECAUCIÓN:
Antes de intentar limpiar la
pieza,desconéctela o apague el interruptor o remueva el
fusible de la caja de fusibles.
Solución de problemas
Problema
Causa Posible
Solución
El dispositivo de iluminación no
se ilumina.
La electricidad está
apagada.
Asegurate de que el suministro de
electricidad esté encendido.
El cortacircuito está
apagado.
Verifica que el cortacircuitos está en la
posición de
“
ON
”
(encendido).
El fusible se dispara o el
disyuntor se dispara cuando el
aparato se ilumina.
Los cables están
cruzados o el cable de
alimentación está
desconectado.
Compruebe las conexiones del cableado.