13
Installation
1
Acoplar la placa de montaje a
la techo
2
Fijar el lazo
□
Coloque la placa de montaje (AA) encima del
tomacorriente de modo que éste pueda ser visto en
el círculo del centro de la placa de montaje (AA).
□
Marque el lugar para los cuatro agujeros en la techo.
□
Quite la placa de montaje (AA) a la techo. Use el
taladro para hacer dos agujeros de 5 mm de
profundidad sobre las dos marcas hechas en la
techo usando como guía la placa de montaje (AA).
□
Inserte las anclas de plástico (EE) dentro de los
agujeros en la techo.
□
Atornille ligeramente los tornillos autorroscantes
(DD) dentro de las anclas de plastic (EE). Asegúrese
de dejar aproximadamente 1/8 de espacio entre la
cabeza de los tornillos autorroscantes (DD) y la
techo.
□
Coloque la placa de montaje (AA) a través de la
cabeza de los tornillos autorroscantes (DD).
□
Gently move the mounting plate (AA) until the heads
of the self-threading screws (DD) slide into the
narrow ends of the keyholes.
□
Acople la placa de Montaje (AA) a la caja de salida
(no incluido) usando los tornillos de la caja de salida
(CC)
□
Atornille el lazo (D) en la boquilla (E).