3
Attaching the lower side panel
With assistance from other adults, place the
Lower side panel (F) on the smooth and soft
surface with the smooth end on top.
Insert the wooden tenons into the corresponding
holes of the Top (A). Slightly move parts to make
sure the holes of the Lower side panel (F) and
the holes of the Top (A) match.
Then attach them with Flat washers (CC), Spring
washers (BB) and Bolts (AA) by using the Hex
wrench (DD).
Repeat the above steps to attach another Lower
side panel (F) to the Top (A).
Do not tighten all bolts in this step for later
adjustment.
4
Attaching the base
With assistance from other adults, slightly move
parts to insert the wooden tenons of the Lower
side panel (F) and Left and Right partition (H&I)
into the corresponding holes of the Base (B).
Attach them with Flat washers (CC), Spring
washers (BB) and Bolts (AA) by using the Hex
wrench (DD).
Do not tighten all bolts in this step for later
adjustment.
8
Assembly (continued)
