Operation
Remote Control (O)
Control Panel on
electric fireplace insert (N)
BASS
VOL
TIMER
SPEED
FIREPLACE
AUDIO
HEAT
There are 18 buttons on the remote control and 8 corresponding buttons on the control panel of the electric fireplace insert.
FIREPLACE
< > Turns the flame and logs On/Off.
< > Controls the brightness of the flame and logs.
<HEAT> Controls the functions of the heater. Press the button once to set the heater to HIGH (1,500 watts/hour). Press the
button twice to set the heater to LOW (750 watts/hour). Press the button three times to turn the heater OFF.
<COLOR> Controls the color of the flame. The default setting for the flame color is YELLOW. Each time the flame button is
pressed, the color of the flame will change. The last setting causes the flames to automatically and continuously cycle through
all colors, changing every 15 seconds. Pressing the COLOR button one more time will return to the default color.
<SPEED> Controls the speed at which the flame effect turns. There are 5 speed levels. The default speed is level three. There
are two slower speeds and two faster speeds which can be set by pressing the SPEED button.
<TIMER> Controls the duration of the heater timer. Press the TIMER button to increase the timer setting by 1 hour each time
this button is pressed (settings from 0 hour to 8 hours). When the control panel shows "0H", the TIMER function has not been
activated.
< > Press this button for more than 2 seconds to lock the fireplace. This prevents misuse by children and interference by
other remote controls of other home devices. Press this button for more than 2 seconds again to unlock this function.
WARNING-
The fireplace must be properly installed before it is used.
14
