9
Installing the back panel
Attach the Side back panel (D) and Middle back
panel (E) to the back of the mantel by using
Round head screws (GG) and a screwdriver ( not
provided). Make sure the OAK veneer side of the
back panels face the front of the fireplace.
10
Attaching the door hinge
Place the Left door (L) facing down on a soft and
smooth surface.
Align the holes on the Door hinge (FF) and the
punctures on the Left door (L).
Attach them with Flat head screws (EE) using a
screwdriver (not provided).
Repeat the above steps to attach the Door hinge
(FF) to the Right door (M).
Tighten all screws in this step.
It is PROHIBITED to use
this mantel WITHOUT the
Middle back panel being
installed.
E
11
Please contact 1-800-986-3460 for further assistance
HOMEDEPOT.COM/HOMEDECORATORS
Assembly (continued)
Note: If the fireplace mantel is sloping,
it is normal. Please move the mantel
straight (90 degree angle) when
installing back panels.
Place the Side back panel (D) so it is
fully in the groove of Base (B) and the
groove of Lower side panel (F). There
should be no space between the
grooves and back panels.
Center Middle back panel (E) and make
sure the bottom edge of it tightly
pushes against the bottom edge of the
Shelf (C).
