15
Other Important Features
To protect the heater, the fan will continue turning for a few seconds after heater is shut down.
If the temperature inside of the electric fireplace insert (N) becomes abnormally high, the temperature protection mechanism will
turn on automatically and the heater will be shut down within a few seconds. Please remove the power cord from outlet and wait
a few minutes for heater to cool down or until temperature protection mechanism reconnects, then plug in the power cord to
resume.
ALWAYS disconnect the power cord from the electrical outlet before any internal maintenance or replacement of parts is done.
Dust the fireplace on a regular basis using a soft, lint-free cloth and a high-quality furniture polish. Always avoid "dry dusting"
the fireplace as dusters can scratch the wood finish.
Always use the same type of furniture polish when dusting the fireplace. Alternating between different types of furniture polish
can cause clouding of the wood finish.
Avoid using soap/water to clean the fireplace. Soap can damage the wood finish and water can penetrate the wood causing
damage. Anytime liquid comes into contact with the fireplace, it should be dried immediately to avoid damage to the wood.
If possible, the fireplace should be placed in a location where it will not be exposed to direct sunlight for long periods of time.
Sunlight can cause damage to wood finishes, so minimizing its exposure will lengthen the life of the fireplace.
Use caution when opening the metal cabinet of the electric fireplace insert during inspection and maintenance.
VOL
BASS
BASS
BASS
BASS
VOL
VOL
VOL
Operation (continued)
Please contact 1-800-986-3460 for further assistance
HOMEDEPOT.COM/HOMEDECORATORS
CARE AND MAINTENANCE
AUDIO
This fireplace include Bluetooth speaker, the Qualified Design ID (QDID) is 91284.
< > Turns the Bluetooth either on or off. When the Bluetooth is on, press the button once to turn the Bluetooth off.
"GOODBYE" will sound from the speaker. Press it again to turn the Bluetooth on. "HELLO" will sound from the speaker. During
waiting for a connection, "Wait pair" will sound from the speaker. When the Bluetooth connection is successfully paired, "Ok"
will sound from the speaker. At this point, you can play music from the phone.
When the Bluetooth
is disconnected, "disconnected" will sound from the speaker.
playing.
<EFFECT> Controls the sound effect mode. Each time the EFFECT button is pressed, the sound effect scene mode changes.
Available settings are Opera, Rock, Classic and Jazz.
< & > Previous and next song selection button. During music playing, press button to go back to the previous
song; press button to go to the next song.
< & > Control the Bass of the music. Press or to increase or decrease the bass by one level. Press and hold to
scroll up or down through the 12 levels.
< & > Control the volume. Press or to increase or decrease the volume by one level. Press and hold to scroll
up or down through the 12 levels.
