background image

7

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly - Standard Ceiling Mount

Routing the wires

Preparing for mounting

 

Remove the magnetic canopy bottom cover (JJ) from the canopy 
(C) by pulling it off.

 

Loosen the two canopy screws (FF) located in the bottom of the 
mounting bracket (A).

 

Turn the mounting bracket (A) counterclockwise and lift it up to 
remove the mounting bracket from the canopy (C).

 

Connect the shorter lead wire (L) to the fan wires exiting the top of 
the fan motor assembly (E) by connecting the molded adaptor plugs 
together. Route the wires through the decorative motor collar cover 
(D) and then the center of the canopy bottom cover (JJ).

 

Make sure the opening of canopy (C) is on top and insert the ball/
downrod (B) through the canopy (C).

 

Route the wires exiting the top of the fan motor assembly (E) 
through the downrod as shown.

2

1

NOTE:

 The fan comes with 12 in. lead wires for use with 

the provided 6 in. ball downrod assembly (B). If you wish 
to use a longer downrod, attach the extension wire (K) to 
the fan by connecting the molded adaptor plugs from the 
extension wires to the adaptor plugs from the fan.

Assembling the fan

 

Loosen, but do not remove, the setscrew (KK) on the collar (PP) on 
top of the fan-motor assembly (E).

 

Install the downrod (B) by inserting it into  the motor collar (PP), 
and turning it clockwise until the holes at the bottom of the ball/
downrod assembly (B) align with the holes in the collar on top of 
the fan-motor assembly (E). 

 

Carefully insert the hanger pin (CC) through the holes in the collar 
and ball/downrod assembly (B). Be careful not to jam the hanger 
pin (CC) against the wiring inside the ball/downrod assembly (B).

 

Insert the locking pin (DD) through the hole near the end of the 
hanger pin (CC) until it snaps into its locked position. 

 

Re-tighten the setscrew (KK) on the collar (PP) on top of the fan-
motor assembly (E).

WARNING:

  Failure to properly install the locking 

pin (DD) could result in the fan becoming loose and 
possibly falling.

CAUTION:

 To ensure wobble-free operation and to avoid 

damage to the fan, the downrod (B) and the setscrew (KK) 
must be completely tightened.

3

A

C

JJ

FF

C

JJ

D

E

KK

DD

CC

PP

B

C

JJ

B

E

D

L

NOTE:

 The magnet is pre-attached on the canopy bottom 

cover for you to remove and install easily.

Содержание 56049


















Отзывы: