background image

13

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Operating Your Fan and Remote Control

POWER ON/OFF

Press and release the power button to turn the fan on or off.

FAN SPEED

LEDs on the fan speed button will illuminate to the corresponding speed.

Press and release 1 time: turns the fan speed to 5.

Press and release 2 times: turns the fan speed to 4.

Press and release 3 times: turns the fan speed to 3.

Press and release 4 times:  turns the fan speed to 2.

Press and release 5 times:  turns the fan speed to 1.

Press and release 6 times: turns the fan off.

NOTE:

 The remote receiver includes a memory function that will 

return the fan to its last setting when turned on via the power 
button.

FAN REVERSE

Press and release the fan reverse button to reverse the rotation of your 
ceiling fan.

A. Warm weather (Forward) - A downward airflow creates a cooling 
effect. This allows you to set your air conditioner on a higher setting 
without affecting your comfort.

B. Cool weather (Reverse) - An upward airflow moves warm air off of the 
ceiling. This allows you to set your heating unit on a lower setting without 
affecting your comfort.

NOTE:

 Do not wait for the fan to stop before pressing the reverse 

button. The fan will not reverse direction if the fan is not moving.

A. Warm weather

B. Cool weather

NOTE:

 On start up your ceiling fan will oscillate back and forth. 

This is NORMAL OPERATION for DC ceiling fans as it goes 
through its calibration cycle. The fan is NOT DEFECTIVE.

Power

Fan speed

Fan 

Содержание 56049


















Отзывы: