background image

2

Table of Contents ................................................................ 2

Safety Information ............................................................... 2

Warranty ............................................................................... 3

Pre-Installation .................................................................... 3

Installation ............................................................................ 6

Assembly .............................................................................. 7

Operation ........................................................................... 14

Care and Cleaning ............................................................. 15

Troubleshooting ................................................................. 15

1. 

To reduce the risk of electric shock, ensure the electricity has been 
turned off at the circuit breaker or fuse box before you begin.

2. 

All wiring must be in accordance with the National Electrical Code 
ANSI/NFPA 70 and local electrical codes. Electrical installation should 
be performed by a qualified licensed electrician. 

3. 

The outlet box and support structure must be securely mounted and 
capable of reliably supporting a minimum of 35 lbs (15.9 kg). Use 
only UL-listed outlet boxes marked “Acceptable for Fan Support of 
35 lbs (15.9 kg) or less.”

4. 

The fan must be mounted with a minimum of 7 ft. (2.1 m) of 
clearance from the trailing edge of the blades to the floor.

5. 

Do not place objects in the path of the blades.

6. 

To avoid personal injury or damage to the fan and other items, use 
caution when working around or cleaning the fan.

7. 

After making electrical connections, spliced conductors should be 
turned upward and pushed carefully up into the outlet box. The 
wires should be spread apart with the grounded conductor and the 
equipment-grounding conductor on one side of the outlet box.

8. 

All set screws must be checked and retightened where 
necessary before installation.

9. 

Use only with light kits marked suitable for damp location.

WARNING:

 To reduce the risk of personal injury, do 

not bend the blade brackets (also referred to as 
flanges) during assembly or after installation. Do 
not insert objects in the path of the blades.

WARNING:

 To reduce the risk of fire or electric 

shock, do not use this fan with any solid-state 
speed control device.

WARNING:

 Electrical diagrams are for reference 

only. If you are using a light kit, refer to the light kit
instructions manual to make the electrical
connections. Optional use of any light kit shall be
UL-listed and marked suitable for use with this fan.

WARNING:

 To avoid possible electrical shock, turn 

the electricity off at the main fuse box before 
wiring. If you feel you do not have enough electrical 
wiring knowledge or experience, contact a licensed 
electrician.

Safety Information

Table of Contents

CAUTION:

 To reduce the risk of personal injury,

use only the screws provided with the outlet box.

WARNING:

 To reduce the risk of fire, electric shock 

or personal injury, mount to outlet box marked 
“Acceptable for fan support of 35 lbs (15.9 kg) or 
less”, and use screws provided with the outlet box.

READ AND SAVE THESE INSTRUCTIONS.

WARNING:

 To reduce the risk of fire or electric 

shock, this fan should only be used with fan speed 
control part no. XX-XXX, manufactured by Chungear 
Industrial Co.,Ltd.

CAUTION:

 Do NOT use this fan with a dimmer switch 

or wall control. Using a dimmer switch or wall 
control will damage the fan.

CAUTION:

 Changes or modifications not expressly 

approved by the party responsible for compliance 
could void the user’s authority to operate the 
equipment.

WARNING:

 To reduce the risk of electric shock, this 

fan must be installed with an isolating wall switch.

Содержание 56049


















Отзывы: