12
Assembly - Attaching the Blades
Attaching the fan blades
1
□
Attach a blade (F) to blade bracket (M) using the decorative
nuts(BB) and blade attachment screws (AA) provided. Insert
a blade attachment screw (AA) through a hole in the blade
(F) and the blade bracket (M) and into the decorative nut
(BB). Repeat for the two remaining holes in the blade (F).
□
Tighten each screw (AA) securely.
□
Repeat these steps for the remaining blades.
Attaching the light kit pan
1
□
Remove one screw (NN) from the black bracket below fan motor
assembly (E), loosen but do not remove the other two screws.
□
Connect the blue wire exiting the bottom of the fan motor
assembly (E) with the black wire from the top of the light kit pan
(G).
□
Connect the white wire exiting the bottom of the fan motor
assembly (E) with the white wire from the top of the light kit pan
(G).
□
Push the light kit pan (G) up to the fan motor assembly (E) so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit pan (G) clockwise.
□
Re-install the screw (NN) that was removed in step 1.
□
Make sure all the screws are firmly tightened.
Assembly - Attaching the Light
E
AA
BB
F
M
NN
G
E
