Homa SaniQ Plus Series, Инструкция по эксплуатации

Страница: 28 / 34

28
7. Troubleshooting
In order to prevent damage or serious injury while rectifying machine faults, the following points must be
observed:

Only attempt to rectify a fault if you have qualified personnel. This means each job must be carried
out by trained specialist personnel, for example electrical work must be performed by a trained
electrician.

Always secure the machine against an accidental restart by disco nnecting it from the electric
system. Take appropriate safety precautions.

Independent work on the machine is at one's own risk and releases the manufacturer from any
warranty obligation.
Failure Cause Remedy
Low pump capacity Discharge blocked / breaked Clean / remove break
Non-return valve polluted Clean
Head to high Reduce head
Motor does not start No power available Check power supply
Plug is not plugged in Insert the plug
Pump is blocked by impurities Clean tank and pump housing
Motor is defect
Exchange by qualified
personnel
Electronics are defect
Exchange by qualified
personnel
Motor operates, pump gives no
liquid
Discharge blocked / breaked Clean / remove break
Non-return valve polluted Clean
Pump does not switch
automatically Float switch polluted Clean
(either a float switch or a
pressure-switch is installed)
pressure-switch is defect
Exchange by qualified
personnel
Further steps for troubleshooting
If the items listed here do not help you rectify the fault, contact our customer service. They can help you as
follows:

Telephone or written help from customer service

On-site support from customer service

Checking and repairing the machine at the factory
Note that you may be charged for some services provided by o ur customer support. Customer service will provide
you with details on this.