Homa SaniQ Plus Series, Инструкция по эксплуатации

Страница: 24 / 34

24
3.4. Functional description
The pumping medium passes through the various feed streams into the container. There, it is collected until it
reaches a certain level and activates the float switch. This turns off the pump automatically. Now the pumping
medium is being supplied by the pressure outlet above the flood level of the public sewer.
3.5. Delivery
Your wastewater lifting plant for above-ground installation includes:

Containers with lids

Submersible pump with float switch

Check valve in the pressure outlet

Elastic connecting piece for the supply with two hose clamps

Elastic connection piece for the pressure outlet with two hose clamps

Washing machine connection:

Carbon filter in the vent with overflow protection
4. Packaging, Transport and Storage
4.1. Delivery
After receipt, the shipment must be checked for damage and completeness immediately. In the event of any
deficiencies, the transport company and the manufacturer must be informed on the day of receipt, as no claims
can otherwise be made or considered valid. Any damage must be noted on the delivery or tr ansport receipt.
4.2. Transport
Do not throw or tip the lifting unit during transport.
Make sure that the lifting unit does not come into contact with sharp edges. Protect the lifting unit from heavy
blows. The products are shipped in suitable packaging by the manufacturer or supplier. This general l y e xcl u d e s
damage during transport and storage. Should you change locations frequently, save the packaging carefully for
re-use.
4.3. Storage
Newly delivered products are prepared for up to 1 year of storage. If the product is being placed in interim
storage, it must be thoroughly cleaned before being stored!
The following must be observed for storage:

Place product securely on a fixed base and secure against tipping over.

In addition, ensure that the equipment is stored in dry areas.

Products with vacuum and/or pressure connections must have these tightly closed to prevent
contamination.

During extended storage the shaft must be protected against moisture, sunlight, heat and frost.
If you observe these regulations, your product can be stored for a longer period of time. However, note that the
elastomer parts and coatings are subject to natural embrittlement.