Homa SaniQ Plus Series, Инструкция по эксплуатации

Страница: 18 / 34

18
1.2. Preface
Dear Customer,
Thank you for choosing one of our company’s products. You have purchased a product which has been
manufactured to the latest technical standards. Read this operating and maintenance manual carefully before yo u
first use it. This is the only way to ensure that the product is safely and economically used.
The documentation contains all the necessary specifications for the product, allowing you to use it properly. In
addition, you will also find information on how to recognize potential dangers, reduce repair costs and dow n ti me ,
and increase the reliability and working life of the product.
All
safety requirements and specific manufacturer’s requirements must be fulfilled before the product
is put into operation. This operating and maintenance manual supplements any existing national re g u l a ti o n s o n
industrial safety and accident prevention. This manual must also be accessible to personnel at all times and a l s o
be made available where the product is used.
1.3. Proper use
The HOMA products comply with the valid safety regulations and meet the demands of state -of-the-art
technology. In the event of improper use, there is a danger to life for the user as well as for third parties.
Moreover, the product and/or attachments may be damaged or destroyed.
It is important to ensure that the product is only operated in technically perfect condition and as int ended.
To do so, follow the operating instructions.
1.4. Copyright
This operation and maintenance manual has been copyrighted by the manufacturer. This operation and
maintenance handbook is intended for the use by assembly, operating and maintenance perso n ne l . It co n ta i n s
technical specifications and diagrams which may not be reproduced or distributed, either completely or in pa rt, o r
used for any other purpose without the expressed consent of the manufacturer.
1.5. Warranty
Costs for removal and installation of the complained product at the installation place, costs for the ride of the
mechanicians to the location and from the installation place as well as costs for transport are not comp o n e n ts o f
our warranty. Hereby arose costs, especially costs for checking and transport are bearing by the sender or
operator of the pump. This is also valid for an asserted warranty claim if a check results that the unit works
faultless and is free of defects. All products have a high quality standard. Each product is defe ated by a strict
technical end control before delivery. A warranty repair achieved by us does not extend the warranty period.
Replaced spare parts give no reasons for a new warranty period. Extensive claims are excluded, especially s u ch
as diminution, change or compensation also for any kind of follow up damages.
In order to ensure that your guarantee claim is processed as efficiently as possible, please contact us or the
appropriate sales representative. Once your claim for a return has been agreed, you will receive a return
certificate. Please then send the rejected product, carriage prepaid, to the factory together with the return
certificate, proof of purchase and an indication of the damage. Claims made on grounds of damage caused in
transit must be established and confirmed on delivery of the product by the express company, the railway
company or the postal service.
1.5.1. General information
This chapter contains the general information on the warranty. Contractual agreements have the highe s t p ri o ri t y
and are not superseded by the information in this chapter!
The manufacturer is obliged to correct any defects found in the products it sells, provided that the following
requirements have been fulfilled:
• The defects are caused by the materials used or the way the product was manufactured or designed.
• The defects were reported in writing to the manufacturer within the agreed warranty period.
• The product was used only as prescribed.
• All safety and control devices were connected and inspected by authorized personnel.
If no other provisions have been made, the warranty period applies to the first 12 months after in itial start-up o r to
a max. of 24 months after the delivery date. Other agreements must be made in writing in the order confirmati o n .
These agreements will remain valid at least until the agreed warranty period of the product has expired.
1.5.2. Spare parts, add-ons and conversions
Only original spare parts as supplied by the manufacturer may be used for repairs, replacements, add -ons and
conversions. Only these parts guarantee a long working life and the highest level of safety. These parts have
been specially designed for our products. Self-made add-ons and conversions or the use of non-original spare
parts can seriously damage the product and/or injure personnel.