10
EN: ESPRESSO MAKER |
Instruction Manual
CLEANING AND MAINTENANCE:
1. Cut off power source and let the coffee maker cool down completely before cleaning.
2. Clean housing of coffee maker with moisture-proof sponge often and clean water tank, drip tray and removable shelf
regularly then dry them.
NOTE:
Do not clean with alcohol or solvent cleanser. Never immerse the housing in water for cleaning.
3. Detach the metal funnel by turning it clockwise, get rid of coffee residue inside, then you can clean it with cleanser, but at
last you must rinse with clear water. Do not wash the metal funnel in a dishwasher.
4. Clean all the attachments in the water and dry thoroughly.
NOTE:
Clean the appliance after every use in order to make it work properly.
CLEANING MINERAL DEPOSITS
1. To ensure your coffee maker can operate efficiently, internal piping is clean and the peak flavor of coffee, you should clean
away the mineral deposits left every 1-2 months.
2. Fill the tank with water and descaler to the MAX level (the proportion of water and descaler is 4:1, details refers to the
instruction of descaler. Please use “household descaler”, you can use the citric acid (obtainable from chemist’s or drug stores)
instead of the descaler (one hundred parts of water and three parts of citric acid).
3. According to the program of preheating, put the metal funnel (no coffee powder in it) and carafe (jug) in place. Brew water
per “PREHEATING”.
4. Press down the ON/OFF button “
” to turn on the unit, the power indicator (red) will be illuminated, you should press
the pump control button “
” to the lower position, make sure the coffee/steam button “
” is at the higher position,
when there is water flowing out and close the pump by pressing the pump control button “
” again, and wait for a
moment, the coffee maker begins to be heated.
5. When the ready indicator (green) illuminates, it shows the heating is finish. Pressing down the pump control button “
”
to the lower position and make make two cups coffee (about 2Oz). Then close the pump and wait for 5s.
6. Press down the coffee/steam button “
” to the lower position, waiting for until the green indicator is illuminated. Make
steam for 2min, then turn the steam knob to the “O” position to stop making steam. Press the ON/OFF button “
” to turn off
the unit immediately, make the descalers deposit in the unit at least 15 minutes.
7. Restart the unit and repeat the steps of 4-6 at least 3 times.
8. Then pressing and release the coffee/steam button “
” to the higher position, when the green lamp is illuminated,
press down the pump control button “
” to the lower position to brew until no descaler is left.
9. Then brewing coffee (no coffee powder) with tap water in the MAX level, repeat the steps of 4-6 for 3 times (it is not
necessary to wait 15 minutes in step of 6), then brewing until no water is left in the tank.
10. Repeat the step of 9 at least 3 times to make sure the piping is cleanly.
