Holzmann TS 250F-1600, Руководство пользователя

Страница: 42 / 63

HOLZMANN Maschinen Austria www.holzmann-maschinen.at
Strana 42
Formátovací pila / panel saw TS 250F-1600
Cross-cutting small plates
Adjustment of the loss, as well as guide the
workpiece through the rip fence.
Use a push stick.
Cross-cutting of long plates
Setting the target width on the mi-
ter gauge.
Tilt stop at the desired level fix.
Workpiece secured with hold-down
Feed with sliding table
Alternatively, with angle stop in position 90 °
Workpiece secured with hold-down
No resting on table boom
Preferable variant depending on dimensions of
the workpiece
C utting of large plates
Workpiece support table on boom
Side of the rip fence
Decrease in scale to the right
Miter fence (90 °) before work
Workpiece fixation with retention
cutting boards
Miter fence behind workpiece
Lateral fixation with tilt stop
Workpiece fixation by means of
retainers