Holzmann TS 250F-1600, Руководство пользователя

Страница: 47 / 63

HOLZMANN Maschinen Austria www.holzmann-maschinen.at
Strana 47
Formátovací pila / panel saw TS 250F-1600
16 TROUBLESHOOTING
Disconnect the machine from the power supply prior to any checks performed at the
machine itself !
Trouble Possible cause Solution
Machine does not start
•
Emergency stop switch to
switch off
•
switch is broken
•
Turn the emergency OFF
switch to the right to unlock
to
•
Repair the the switch
Burn marks on the work-
piece
• The blade is blunt • Replace the blade
The finished size of the
machined workpiece does
not correspond to the set
cutting width on rip fence
•
Adjusted measurement
scale for the cutting width
display
•
Setting dimension scale : cut
workpiece on the rip fence ,
measure the workpiece and
the measuring scale move
so that the measured aver-
age width is shown at the
edge of the ruler
Workpiece clamped in ad-
vancing
•
dull blade
•
Riving knife thickness does
not match the used blade
•
Replace with sharp blade
•
Splitting wedge thickness
must be greater than or
equal to blade thickness .
Broken edges on the
workpiece
•
The scoring saw is not on
the same line with the main
saw
•
Set the scoring saw a new
17 ELEKTRICKÉ ZAPOJENÍ / ELECTRIC DIAGRAM
3~, Motor 1~, Motor