HOLZMANN MASCHINEN BBS550SMART, Руководство пользователя

Страница: 38 / 55

HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Strana 38
BBS550Smart
9.
Install the two pieces anti-sway bar on
both left and right machine bracket.
10. Assembly the end stops on the
tracks
Fasten the four end stops (38, 2 x
39, 40) with screws and nuts (24)
to the ends of the tracks as shown.
11. Assembly clamping bracket/ stops
Insert clamp (30) into clamp holder
and fix with screw (S1).
Insert long stop (37) on log support
and fix with screw. Insert the short
stop (27) into the holder and also fix it
with screws (S1). The angular position
of the stops on the log support can be
adjusted using the two screws (S2).
12. Control of the sawblade distance.
If this is not identical on the left
and right, it must be adjusted at
the rear handle to either raise or
lower one side.