HOLZMANN MASCHINEN BBS550SMART, Руководство пользователя

Страница: 40 / 55

HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Strana 40
BBS550Smart
16.2 Operation
• Place a log onto the track and secure it with the
log assembled supports.
• Press the ON button.
• Wait until saw blade reaches maximum speed.
• Turn on the lubrication.
• Set desired cutting height.
• Slide saw head slowly over the track.
• Turn off the machine after completing operation
with the OFF-button.
17 OPERATION
18 CLEANING, MAINTENANCE, STORAGE, DISPOSAL
18.1 Cleaning
N O T I C E
The use of solvents, aggressive chemicals or abrasives can lead to damage to
paintwork and other property on the machine!
Free the machine from dust and other deposits after each use. Only use water and, if necessary,
a mild detergent for cleaning! The use of compressed air or high-pressure cleaners is not
recommended. The latter can reduce the operational suitability of the machine or shorten its
service life, because water (moisture) could get inside the machine when it is used.
18.2 Maintenance
W A R N I N G
Danger due to electrical voltage! Always disconnect the machine from the power
supply before servicing or maintenance work and secure it against accidentally re-
activation!
The machine does not require extensive maintenance and only a few parts require maintenance.
Malfunctions or defects that are likely to impair your safety must be rectified immediately!
• Check that the safety devices are in good condition before each operation.
• Check the connection s at least once a week for a tight fit.
• Check the correct and readable status of the Machine's warning and safety labels on a regular
basis