HOLZMANN MASCHINEN ABS 2480, Руководство по эксплуатации

Страница: 26 / 58

CLEANING, MAINTENANCE, STORAGE, DISPOSAL
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 26
MASCHINENNAME
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
15.1 Cleaning
N O T I C E
Never use cleaning agents such as petrol, kerosene, soda or the like but only mild,
non-abrasive cleaners..
Regular cleaning guarantees the long service life of your machine and is a prerequisite for its safe
operation.
Therefore, clean the device after each use and let it dry afterwards.
Impregnate bare surfaces of the machine against corrosion (e.g. with rust inhibitor WD40).
15.2 Maintenance
W A R N I N G
Danger due to electrical voltage! Manipulating the machine when connected to
the power source can cause serious injury or death. Always disconnect the machine
from the power supply before servicing or maintenance work and secure it against
unintentional restarting!
N O T I C E
Defects can be rectified by your specialist retailer. Repair work may only be carried
out by qualified personnel.
The machine is low-maintenance and only a few parts require maintenance. Malfunctions or
defects that are suitable to impair your safety must be repaired immediately!
- Before each operation, check that the safety devices are in perfect condition.
- Check the screw connections for tightness at least once a week.
- Regularly check the correct and legible condition of the warning and safety labels on the
machine.
15.2.1 Changing the chip collection bag
N O T I C E
Change the chip sack when it is 60-70 percent full. Only use chip collection bags that
correspond to the dimensions of the machine. Only use 100 percent tight chip
collection bags.
 Switch off the machine ten minutes before changing the chip bag so that the dust particles
can settle.
 Then disconnect the machine from the power supply.
 Change the chip sack.
15.3 Storage
Only store the machine in a dry environment protected from weather influential