holzkraft 5741400, Инструкция по эксплуатации

Страница: 9 / 26

Transport, packaging, storage
TKS-Z 400 | Version 1.01 9
6 Transport, packaging, storage
6.1 Delivery and transport
Delivery
After delivery, check the circular saw for visible transport
damage. If you find any damage to the circular saw, re
-
port it immediately to the shipping company or dealer.
Transport
Transport with a forklift / pallet truck:
For shipment, the boxed unit is delivered on a pallet so
that it can be transported by forklift or pallet truck.
Fig. 6: Transport with a forklift
Transport with a crane
It is forbidden to attach the crane straps to the saw arm,
girder or to the saw columns. The attachment points on
the frame must be used. Avoid swinging the machine
while transporting with a crane.
Fig. 7: Transport with a crane
6.2 Packaging
All of the machine‘s packaging materials and packing
aids are suitable for recycling and must always be dispo-
sed of using material-based recycling systems.
Packaging materials made of cardboard must be shred-
ded and disposed of as part of waste paper recycling.
The foils are made of polyethylene (PE), padding is
made of polystyrene (PS). Dispose of these substances
at a recycling centre or hand them over to the relevant
waste disposal company.
6.3 Storage
Thoroughly clean the Circular saw in a dry, clean and frost-
free environment. Keep the saw in such a way that it can not
be put into operation by unauthorized persons and nobody
can injure themselves with the standing saw. Cover the ma
-
chine with a protective tarpaulin.
DANGER!
To avoid injury, do not attempt to assemble the ma
-
chine if any parts are missing. Do not plug in the po
-
wer cord and only switch on the machine once the
missing parts have been procured and installed cor
-
rectly.
WARNING!
Danger to life!
If the weight of the unit and the permissible load
capacity of the lifting equipment are not observed
during transport or lifting work, the unit may tilt or fall.
- During transport and lifting work, observe the weight
of the unit and the permissible load capacity of the
lifting equipment.
- Check hoists and load slings for perfect condition.
NOTE!
The saw is a heavy machine. Do NOT overwork
while unpacking or moving your machine. Get sup
-
port for transporting the machine.
DANGER!
Do not store the table saw unprotected outdoors or in
a humid environment.