holzkraft 5741400, Инструкция по эксплуатации

Страница: 18 / 26

18 TKS-Z 400 | Version 1.01
Care, maintenance and repair
10.1 Care after work
Step 1: Disconnect the power plug from the power outlet.
Step 2: Empty and clean the suction device.
Step 3: Extract the machine from sawdust and sawdust
and clean it with a dry cloth and / or compres
-
sed air (wear protective goggles!). In particular,
the guide rails must be kept clean. Always
keep the surfaces of the support tables clean.
In particular, remove resin residue with a
suitable care spray.
Step 4: Spray all unpainted metal surfaces with some
anti-rust spray.
Step 5: Inspect the machine for damage to the safety de
-
vices and saw blade. If necessary, carry out
the repair or arrange for it, observing the safety
instructions.
Step 6: Check the machine regularly and replace if
necessary:
- Loose screws and nuts
- Worn or damaged switches
- Worn or damaged saw blade
- Worn or damaged blade guard
10.2 Maintenance and repair
Maintenance and repair work may only be carried out by
qualified personnel.
If Circular saw does not work properly, contact a dealer
or our customer service. The contact details can be
found in chapter 1.2 Customer Service.
All protective and safety equipment must be reinstalled
immediately after repair and maintenance work has been
completed.
Visual inspection and maintenance
NOTE!
After care, maintenance and repair work, check that
all guards and protective devices have been pro-
perly mounted on the machine and that there are no
tools left inside the machine or in its working area.
Damaged safety devices and equipment parts must
be repaired or replaced by customer service or a
specialist workshop.
Use protective gloves!
NOTE!
Never use strong cleaning agents for any cleaning
work. This can damage or destroy the device.
Main
-
tenance in-
terval
Maintenance work
before each
use Visually check that the saw blade pro-
tection cover is free of sawdust..
before each
use Visually check whether the distance
between the riving knife and the saw
blade is 3mm - 8mm.
before each
use Check the mains cable for damage
and if necessary replaced it by a qua-
lified electrician
after 40
hours Check the function of the brake. The
saw blade must stop within 10 se-
conds of being switched off.
monthly Clean and oil the guide elements for
adjusting the saw blade.
monthly Remove sawdust with a vacuum cle-
aner or brush.
after 300
hours Check all screw connections and
tighten if necessary.
as required Replace the motor if the braking func-
tion drops.