Holux FUNTREK 130 PRO, Руководство пользователя

Страница: 4 / 85

HOLUX FunTrek 130 Pro
3
About the power adapter
1.
Do not use the power adapter in a wet environment. When hands and feet are wet, do
not touch the power adapter.
2.
While using the power adaptor, ensure that the area is well ventilated. Do not let
paper or other material cover the power adaptor, as this will interfere with cooling. Do
not use the power adaptor whilst it is in a bag.
3.
Do not attempt to repair the device. If device is damaged or is in a wet environment,
replace the device immediately.
4.
It is not recommended to charge from a PC because the PC power voltage is not
enough to supply the device.
About the battery
1.
Use only the original factory approved power adapter.
2.
A Lithium battery is built into the device. To prevent fire or skin burns, do not
disassemble, pierce, impact, or expose the battery to fire. The battery will crack,
explode, or release dangerous chemicals if placed in a fire.
Important instructions
1. Note: Replacing with an incorrect battery may result in an explosion. When disposing
of the battery, follow the instructions. The replacement battery must be a factory
approved original.
2. Regulations must be observed when recycling or disposing of batteries.
3. The battery should only be used in this device.
Normal care and maintenance
FunTrek 130 Pro is a product of superior design and craftsmanship and should be treated
with care. The following suggestions will help you protect your warranty coverage.
1. If your device does get wet, remove the battery, allow the device to dry completely
and then replace the battery.
2. Use a soft clean cloth to wipe the screen.