Hologic Affirm, Руководство пользователя

Страница: 60 / 70

Affirm User Guide
Chapter 6: Troubleshooting
Page 50 MAN-03209 Revision 005
6.2 Error Messages
Table 8: Affirm Error Messages
Error Message How to Correct
No Device Select Select a biopsy device.
No Paddle Install a Biopsy Paddle.
User is not logged in Log in at the Acquisition Workstation.
Unit is unlatched Put both lock levers into the locked position (see the figure
Installation of the Biopsy Guidance Module on page 15).
Unknown Error
1. Select the system status icon in the taskbar of the Selenia
Dimensions.
2. Select the Clear All Faults options.
3. If the message continues to display, contact Technical Support.
Unrecoverable Error Contact Technical Support. Software must be reloaded.
Safety Margin Infringement Move the biopsy device to outside of the safety margin. Press the
Sound button to mute the warning sound.
Calibration Required Contact Technical Support.
Motion Fault
1. Select the system status icon in the taskbar of the Selenia
Dimensions.
2. Select the Clear All Faults options. Another message that is
related to the cause of this error can appear.
3. If the Motion Fault message continues to display, contact
Technical Support.
Comm Error
1. Select the system status icon in the taskbar of the Selenia
Dimensions.
2. Select the Clear All Faults options.
This error can occur when the manual Z-control is turned quickly.
Hardware Error
1. Select the system status icon in the taskbar of the Selenia
Dimensions.
2. Select the Clear All Faults options.
3. If the message continues to display, contact Technical Support.
Selftest Error
1. Disconnect the Affirm cable from the Selenia Dimensions.
2. Reconnect the Affirm to the Selenia Dimensions.
3. If the message continues to display, contact Technical Support.
Stuck Switch Fault
1. Disconnect the Biopsy Control Module from the Biopsy
Guidance Module.
2. Reconnect the Biopsy Control Module to the Biopsy Guidance
Module.