Hologic Affirm, Руководство пользователя

Страница: 53 / 70

Affirm User Guide
Chapter 4: How to Use the System
MAN-03209 Revision 005 Page 43
Observe Targets on Post-Tomographic Scout Image
To project targets from the pre-fire Tomographic Target (scout) onto the post-fire
Tomographic Target (scout), follow these steps:
1.
Select the pre-fire Tomographic Target (scout) thumbnail. The image shows in the
bottom half of a 2-Up display in the Preview screen.
2. Select the post-fire Tomographic Target (scout) thumbnail. The image shows in the
bottom half of the 2-Up display.
3. Select the Project Target button in the Biopsy Staging area to show the pre-fire targets
on the post-fire Tomographic Target (scout).
4.3.6 Post Biopsy
1. Put in a marker, if desired.
2. Rotate the Z-axis Control Knob to move the biopsy device away from the breast.
3. Acquire images as necessary.
4. Release compression.
4.3.7 Printing Stereo Images
When you select a stereo pair from the thumbnail area of the Print screen, the image mode
buttons change. See the
Selenia Dimensions User Guide for instructions on use of the Print
screen.
•
Select the -15 button to show that stereo image in the display area.
•
Select the +15 button to show that stereo image in the display area.
•
Select the middle button to make a 2-up horizontal film with the +15 degree image on
top and the -15 degree image on the bottom.
Figure 32: Stereo Pair Print Screen