EN
38
916.000.966_006
XR4360 (C)
8.4
Maintenance activities
8.4.1
General
•
Check the operation of the tool.
•
Check the tool for damage and leaks. If the tool does not work properly and/or leaks, have it
repaired by a Holmatro Certified Technician.
8.4.2
Hydraulic couplers
•
Check the couplers for damage. Have a Holmatro Certified Technician replace damaged couplers.
•
Clean the coupler with luke warm water and a mild soap solution.
•
Dry the couplers.
•
Lubricate the end of the coupler with hydraulic oil or inject WD-40.
•
Lubricate the locking ring by injecting WD-40 into the space between the back section and the
locking ring.
•
Connect the couplers and check whether the coupler locks automatically. Check the locking by
pulling the hoses apart with a normal manual effort. The couplers must not slip.
•
Disconnect the couplers by turning the locking ring and pulling it backwards.
•
Connect and disconnect the couplers a few times to improve the internal lubrication of the locking
system.
8.4.3
Dust caps
•
Check the dust caps for damage. Replace damaged dust caps.
•
Clean the dust caps with running water. Dry the dust cap and treat it with preservative oil.
8.4.4
Hydraulic hoses
•
Check the hose for damage and leaks. Replace the hose if it leaks, has kinks, the reinforced cover
is visible or it has blisters or bulges higher than 1 mm. In case of doubt always contact the Holmatro
dealer who can assess the seriousness of the damage.
•
Replace the hose no later than 10 years after the date of manufacture, regardless of its use and
external appearance. The date of manufacture is part of the test code, the first 4 digits of the test
code specify the date of manufacture of the hose (yymm*****).
8.4.5
Grip heads
•
Check the grip heads for damage. Replace damaged grip heads.
8.4.6
Mechanical plunger
Refer to Fig. 10.
•
Check the mechanical plunger and the tube for damage and dirt. If the plunger or the tube is
damaged, have it repaired by a Holmatro Certified Technician.
•
Remove any dirt, especially sand.
•
If necessary, lubricate the locking mechanism with Teflon.
•
Do not spray Teflon in the tube or on the grooves, as this attracts dirt.
8.4.7
Hydraulic plunger
•
Check the plunger for damage. If the plunger is damaged, have it repaired by a Holmatro Certified
Technician.
8.4.8
Carrying handle
•
Check the carrying handle for damage. Replace a damaged carrying handle.
Содержание XR 4360
Страница 1: ... i XR 4360 C Handleiding NL Manual EN Mode d emploi FR Betriebsanleitung DE Manual ES Manual PT 手册 ZH ...
Страница 4: ...4 916 000 966_006 XR4360 C Fig 3 B C A ...
Страница 132: ...132 916 000 966_006 XR4360 C i i Fig 4 Fig 5 Fig 6 Fig 7 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 ...
Страница 133: ...XR4360 C 916 000 966_006 133 Fig 8 Fig 9 Fig 10 1 2 3 4 1 2 3 4 ...
