EN
26
916.000.966_006
XR4360 (C)
•
Helmet;
•
Safety goggles or full face shield;
•
Safety gloves;
•
Safety clothing for the entire body;
•
Safety shoes with good ankle support and toe protection.
2.5
Safety regulations with respect to the equipment
•
Store the ram with the hydraulic plunger opened ± 5 mm.
•
Watch out for the danger of being trapped when the plungers are retracted.
•
Always use the grip heads. Make sure that the load always comes in the centre of the grip heads.
Avoid a side load with its risk of sliding off.
•
Make sure that the grip heads only make contact with the objects to be forced aside.
•
Prevent sharp objects from touching the plungers. Damage can cause leaks along the sealing.
•
Before use, check whether the grip heads are properly attached on the ends of the plungers and/or
the fixed side.
•
In situations where the bodywork is unstable, use a ram support to provide a stable base.
2.6
Safety regulations with respect to the operation of the system
•
Make a risk assessment of the procedure before you start work (EN-ISO 12100).
•
Keep bystanders at a distance and be extra careful in the vicinity of people and animals.
•
Make sure the work area is clearly laid out and has good lighting.
•
Avoid stress and work in a structured way. This reduces the risk of errors, combinations of dangers
and accidents.
•
Before use, check the equipment for damage. Do not use the equipment if it is not in good condition
and consult your Holmatro dealer.
•
Stand on a stable base and use both hands to hold the equipment.
•
Hold the equipment only by its carrying handle. Never use any part of the hose as carrying handle.
•
During operation, never get between the object and the equipment.
•
Monitor the situation of the equipment and the structure continuously while using the equipment.
•
Parts of an object that could fly off must be secured.
•
Never couple or uncouple couplers while the system is under pressure.
•
Use only genuine Holmatro accessories and ensure that they have been attached correctly.
•
Make sure that parts of the body never come between moving parts. There is a risk that parts of the
body may be crushed or cut.
•
Make sure that the deadman's handle does not become jammed.
•
Stop immediately if the system makes strange noises or displays aberrant behaviour.
•
Stop immediately if the equipment leaks oil. Oil escaping under pressure can penetrate the skin and
cause serious injury. Go immediately to a hospital with a person who is injected with oil for medical
help. Give a specification of the oil to the medical staff.
•
Return inactive equipment immediately to the tool station.
•
Always adhere to the safety regulations that apply to other equipment that is used in the operation.
2.7
Safety regulations with respect to maintenance
•
Wear personal means of protection when performing maintenance tasks.
•
Never work in a way that could jeopardize safety.
•
Make sure that the equipment cannot roll away or tip over. The control and drive must be switched
off and safeguarded against unexpected activation.
Содержание XR 4360
Страница 1: ... i XR 4360 C Handleiding NL Manual EN Mode d emploi FR Betriebsanleitung DE Manual ES Manual PT 手册 ZH ...
Страница 4: ...4 916 000 966_006 XR4360 C Fig 3 B C A ...
Страница 132: ...132 916 000 966_006 XR4360 C i i Fig 4 Fig 5 Fig 6 Fig 7 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 ...
Страница 133: ...XR4360 C 916 000 966_006 133 Fig 8 Fig 9 Fig 10 1 2 3 4 1 2 3 4 ...