9) Pull upper section of Conveyor Belt through oven cavity.
10) Use a small wire brush or abrasive pad to clean metal rods and idler/drive shafts.
(NOTE: DO NOT ATTEMPT TO CLEAN HEATER TUBES.)
11) For heavily soiled Conveyor Belt, remove belt from oven and soak over night in hot soapy water. Pay
special attention to position of Conveyor Belt links for re-installation of the Conveyor Belt.
12) Clean interior of oven using a mild cleaner and damp cloth.
(NOTE: DO NOT SPRAY CLEANING SOLUTIONS INTO OVEN CAVITY.)
13) Reinstall Conveyor Belt by first lying belt along bottom of the oven cavity.
(NOTE: The smooth side of the belt must be installed to the outside away from the sprockets.)
Next, pull one end of conveyor belt over the lower heater tubes and bring both ends of conveyor belt together.