81161
Rev 06/06/19
Page 2 of 4
www.bmracing.com
Technical Support (866) 464-6553
3.
Turn key to “Accessories” then shi into “D” (Drive)
so you can remove console frame. Then pull frame
backwards and up to remove it completely.
4.
Loosen and retain screws (x2) securing cupholder,
then li and release but do not completely remove
it from console.
5.
Unplug wiring from base of shi er and remove
screws (x2) from front of shi er. Retain screws for
later use.
2.
Open center console lid then li and release
console frame around shi er.
REMOVE STOCK COMPONENTS:
OVERVIEW:
1.
Take a moment to read and understand these
instruc ons before installing your B&M Magnum
Grip Handle.
NOTE:
Please inventory all parts now before con nuing
and if necessary, report any missing items to our tech
line. This will avoid poten ally stranding your vehicle
un l any missing replacement parts arrive.
WARNING:
For maximum safety, perform this installa on on a
clean, level surface with engine turned o
ff
.
CAUTION:
Chock wheels and apply parking brake; do not proceed
un l you are con
fi
dent your vehicle will not move.
