81161
Rev 06/06/19
Page 4 of 4
www.bmracing.com
Technical Support (866) 464-6553
13.
Place console frame back into place and snap it
down into posi on. Set shi er back into “P” (Park).
11.
Set cupholder frame over shi handle; then use
zip
Ɵ
e (3)
to secure boot to shi handle. Finally,
clip o
ff
zip e tail.
12.
Press cupholder frame down then fasten it using
screws (x2) (removed step 4).
Congratula ons, the installa on of your B&M Magnum
Grip Handle is now complete!
NOTE:
No ce this s ck handle is designed with a notch
in its indent corner. To fasten boot, pull fabric over
indent and secure it with zip e. The zip e lock should
rest in shi er notch as shown. In this way, you will
avoid crea ng a lump in boot cloth.
3
