11
XL-DB20021UM-en-US · 2019-08-07 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Mounting Instructions
8. Mounting Instructions
continued
11. Install the washer back onto the drawbar
(Figure 8)
.
12. Grease or lubricate the face of the lock nut before
installation
(Figure 9)
. Install the lock nut and turn until
the nut is .50" (12.7 mm) past the end of the drawbar
shaft
(Figure 10)
.
13. Install the cotter pin by rotating the lock nut clockwise
until the hole in the drawbar shaft appears in one of the
nut castellations.
14. Insert the cotter pin into the drawbar shaft hole and
spread the ends to retain.
Figure 8
WASHER
Figure 9
GREASE FACE OF LOCK NUT
Figure 10
(12.7 mm)
.50"
TURN LOCK
NUT TO ALIGN
WITH COTTER
PIN HOLE
LOCATION
