5
XL-LG20004UM-en-US Rev B · 2018-09-17 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Model Identification
Figure 3
Figure 4
Atlas 65
The Atlas 65 identification code is located on the top cover
or on the side, behind the grease fittings, of each landing gear
leg
(Figure 3 and 4)
. The first number is the part number,
the second number is the type code, and the third number is
the serial number. In order to properly identify the HOLLAND
®
landing gear and its components when communicating with
SAF-HOLLAND
®
or a dealer, please record the part number, type
code, and serial number and refer to them when ordering
replacement parts.
Part No
:
Type Code
:
Serial No
:
Purchase Date:
Mounting Plate
0 - Standard Taper .656" Ø
1 - Standard Taper .531" Ø
Shafts
0 - Standard Universal
1 - Standard Inside
2 - Outside I-Beam 6.5"
3 - Outside I-Beam 10"
4 - Standard Outside
Lube/Warranty
0 - Std. Lube
Std. Warranty
1 - No Lube
™
Std. Warranty
2 - No Lube
™
Lifetime Warranty
Type Code
LG6 0 0 0 00 0 0
Model
LG6 - Atlas 65
Foot Ware
99 - No Foot
98 - Leg with Axle - No Foot
97 - Sand Shoe 4.5" x 10" x 10"
96 - Sand Shoe 4.5" x 10" x 12"
95 - Sand Shoe 2"x 10" x 10"
94 - Sand Shoe 2" x 10" x 12"
93 - Sand Shoe HD 4.5" x 12" x 12"
92 - Standard RCF 10"x 10"
91 - Low Profile RCF
90 - For RCF - No Foot
89 - Low Profile RCF - No Foot
88 - Sand Shoe 4.5" x 16" x 16"
87 - Sand Shoe LP 2" x 12" x 12"
86 - Sand Shoe STD 4.5" x 12" x 12"
85 - Sand Shoe HD 4.5" x 12" x 17"
84 - Sand Shoe HD 4.5" x 12" x 10"
83 - Sand Shoe HD - LP 2" x 10" x 10"
82 - Sand Shoe HD 4.5" x 10" x 10"
81 - Standard RCF 12" x 12"
80 - Sand Shoe 4.5" x 18" x 16"
79 - Sand Shoe LP 2" x 16" x 16"
Leg Assembly
0 - Sets
1 - Leg Without Gear Box
2 - Leg With Gear Box
Travel
3 - 13.5"
5 - 15.5"
6 - 17" - MRL
7 - 17"
9 - 19"
