12
Assembly
Step 8 – Fit arms to mount brackets
8.1 Attach the arms to the top of the mount brackets as shown, using the fasteners and 5mm
Hex key provided. Refer to Fig. 13 and Fig. 14. Ensure head of bolt is on outside of arm.
End of bolt must go through to at least the outside of the nut when tightened.
8.2 Attach the struts to the bottom of the mount brackets as shown, using the fasteners and
5mm Hex key provided. Refer to Fig. 13 and Fig. 14. Ensure head of bolt is on outside of
arm.
Do not over tighten the fasteners as the arms and struts must be free to pivot.
In this manual left and right side is referenced as if you are looking at your clothesline.
i.e. At the wall/post kit you are assembling to.
Repeat for other arm.
Fig. 13 Single Folding Clothesline
5mm Hex key
Mount bracket
Strut
Washer
Nut
Arm
Bolt
RH arm shown
for reference
RH arm shown
for reference
Fig. 14 Double Folding Clothesline
Mount bracket
Strut
Strut
Long arm
Short arm
5mm Hex key
Washer
Nut
Bolt
Long arm fits in
the Mount bracket.
Short arm fits to
the inside of the
Mount bracket.
