61-140
User’s Guide
Wireless
Two-Bell Door Chime
2
3
4
5
6
7
8
Thank you for purchasing your Two-Bell Door Chime from
RadioShack
. Please read this user’s guide before installing,
setting up, and using your new door chime.
Package Contents
• Wireless Door Chime
• Nylon lanyard
• Bell 1
• Bell 2
• Remote Mounting Bracket (2)
• M 3 Screw (4)
• Anchor (5)
• M 2.6 Brass Screw (2)
• M 3.5 Screw (5)
• User’s Guide
• Quick Start
1
Select Channels
1.
Remove the battery compartment covers on the door
chime and the two bells.
2.
Select the same channel (1, 2, or 3) in the door chime and
doorbell 1.
3.
Repeat step 2 for the doorbell 2.
n
Notes:
• Remove batteries and follow above steps to change
or reset the channel on your door chime and remote
doorbells.
3
Mount Your Door Chime
You can mount your door chime on a door or wall, or set it on a
flat surface using the attached metal stand. To mount to a door
or wall:
1.
Drill a ¼ inch hole in the door or wall and insert an anchor.
2.
Screw an M 3.5 screw into the anchor, leaving the head
extended about
1
/
8
inch.
3.
Align the door chime’s rear keyhole slot to the screw head
and slide the chime down to lock in place.
4
Mount Your Doorbell
1.
Mark two holes using the mounting bracket as a guide. Drill
a ¼ inch hole at each mark. Insert an anchor in each hole.
2.
Align your mounting bracket with the anchors and screw a
supplied M 3.5 screw into each anchor.
3.
Slide your doorbell into the bracket. To lock the doorbell in
place, insert a supplied M 2.6 screw into the bottom of the
mounting bracket.
• If your door chime rings when no one presses one of the
remotes, you may be receiving interference. Switch the
affected door chime and doorbell to another channel.
2
Install Batteries
1.
Insert three C batteries
in your door chime as
indicated by the polarity
symbols (+ and – ).
2.
Insert three AAA batteries
in each remote doorbell as
indicated by the polarity symbols
(+ and – ).
3.
Replace the covers.
Notes:
• Replace the door chime’s batteries
if it buzzes and the LED flashes red.
• Replace the doorbell’s batteries if
the LED turns off.
• Use only fresh batteries of the required size and type.
• Dispose of old batteries promptly and properly. Do not
burn or bury batteries.
• Do not mix old and new batteries, different types
of batteries (standard, alkaline, or rechargeable), or
rechargeable batteries of different capacities.
• If you do not plan to use the alarm for a month or longer,
remove the batteries. Batteries can leak chemicals that can
destroy electronic parts.
2/2
You can also use the supplied lanyard to carry your doorbell
with you as a panic alarm or to let someone know you have
arrived.
1.
Slip the small end through the hole at the top of the
remote doorbell.
2.
Thread the thick end through the loop at the thin end and
pull through.
5
Use Your Door Chime
1.
Slide your door chime to
ON
.
2.
Press the button on one of your doorbells. Your
chime will “ding dong” for doorbell 1 and play
“Home Sweet Home” for doorbell 2.
3.
Slide the door chime to
OFF
when you don’t
want to hear it ring.
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult your local
RadioShack
store or an experienced radio/TV technician
for help.
If you cannot eliminate the interference, the FCC requires that you stop
using your equipment. Changes or modifications not expressly approved by
RadioShack
may cause interference and void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including interfer-
ence that may cause undesired operation.
Limited Warranty
RadioShack
warrants this product against defects in materials and workman-
ship under normal use by the original purchaser for
ninety (90) days
after
the date of purchase from a
RadioShack
-owned store or an authorized
RadioShack
franchisee or dealer.
RADIOSHACK
MAKES NO OTHER
EXPRESS WARRANTIES.
This warranty does not cover: (a) damage or failure caused by or attribut-
able to abuse, misuse, failure to follow instructions, improper installation or
maintenance, alteration, accident, Acts of God (such as floods or lightning),
or excess voltage or current; (b) improper or incorrectly performed repairs
by persons who are not a
RadioShack
Authorized Service Facility; (c)
consumables such as fuses or batteries; (d) ordinary wear and tear or cosmetic
damage; (e) transportation, shipping or insurance costs; (f) costs of product
removal, installation, set-up service, adjustment or reinstallation; and (g) claims
by persons other than the original purchaser.
Should a problem occur that is covered by this warranty, take the product and
the
RadioShack
sales receipt as proof of purchase date to any
RadioShack
store in the U.S.
RadioShack
will, at its option, unless otherwise provided by
law: (a) repair the product without charge for parts and labor; (b) replace the
product with the same or a comparable product; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is
made, become the property of
RadioShack
. New or reconditioned parts and
products may be used in the performance of warranty service. Repaired or
replaced parts and products are warranted for the remainder of the original
warranty period. You will be charged for repair or replacement of the product
made after the expiration of the warranty period.
RADIOSHACK
EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDI-
TIONS NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WAR-
RANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED
WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON
THE EXPIRATION OF THE STATED WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE,
RADIOSHACK
SHALL HAVE NO LIABILITY
OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY
OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR
DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE
OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WAR-
RANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING
FROM INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY,
REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, EVEN IF
RADIOSHACK
HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts
or the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary from state
to state. You may contact
RadioShack
at:
RadioShack
Customer Relations
300 RadioShack Circle, Fort Worth, TX 76102
04/08
www.RadioShack.com
Printed
in China
02B11
61-140
©2011.
RadioShack
Corporation.
All rights reserved.
RadioShack
and
RadioShack.com
are trademarks used by
RadioShack
Corporation.
Protect the environment by recyling used electronics. Go to
E-CyclingCentral.com to find an electronic recycling center near you.
- OR -
ON/OFF.
Channel Switch
Must be set to
same channel
Bell 1
Bell 2
Door Chime
Channel Switch
Must be set to
same channel
- OR -
Add Another Alarm
You can expand your doorbells to sound an
additional alarm. To do this, you will need to wire
one or both doorbells to an alarm that contains a
normally open contact.
1.
Connect both tips of a 2-conductor wire (not
supplied) to a doorbell, as shown, using two
M3 screws.
2.
Connect both tips of the other end of the
2-conductor wire to the extra alarm.
Now, when you press your doorbell, both the door
chime and the alarm will sound.
Specifications
Frequency .............................................. 433.92 MHz ± 600 KHz
Doorbell current consumption ..................................... <10 mA
Chime current consumption ........................ <2 mA @ standby
........................................................................<130 mA @ chime
Chime battery low ................................................. 2.4 V ± 0.1 V
Chime audio power .......................... > 80 dBA @ 10 in (25 cm)
Doorbell operating temperature.......................–4° F to 140° F
...........................................................................(–20° C to 60° C)
Specifications are subject to change and improvement without notice.
Actual product may vary from the images found in this document.
FCC Information
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off