Riga Table Shelf Assembly
Attach an
angle-end tail (V36)
to
each
end of the struts (pos. 3).
Push in as far
as it will possibly go - it is okay if it does
not fully insert.
In
sert one M6x12 (pos S12) bolt at each
end of the
the
greenhouse lateral
support. These should be inserted into
the
lower
inside
channel o
f the lateral
support as shown in picture.
Lay the
cross-profile (pos. 2)
on top of the
greenhouse lateral support and attach
with supplied nuts (pos S1).
3
5
In the lower channel on the
greenhouse
lateral support, insert one M6 x 12 (S12)
per inner curve of the greenhouse.
In lower channel on the outside of the
shelf
longitudinal profile
(pos 1), insert
one
bolt
M6 x 16 (S5) per
inner curve.
Insert one
M6 x 12
bolt (S12) at each end
for the angles (pos. 6)
Step 1
Step 2
Step 3
Step 4
Step 5
