6
Adres producenta/ Adresse des Herstellers/ Manufacturer’s Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków, www.hoegert.com
EN
USER’S MANUAL
DIGITAL UNIVERSAL MULTIMETER HT1E606
Thank you for purchasing our product. Our product, manufactured to a high
standard, will provide years of trouble-free operation if used in accordance
with the instructions and properly maintained.
TABLE OF CONTENTS
1. General information
2. General safety conditions
3. Description and functions
4. Measurements
4.1. Inductive measurement NCV
4.2. Measurement of voltage U DC/AC
4.3. Measurement of voltage I DC/AC
4.4. Resistance measurement
4.5. Capacity test
4.6. Frequency test
4.7. Temperature test
4.8. Continuity test
4.9. HFE transistor test
5. Specifications
5.1. Technical Specification
5.2. Electrical specification
6. Maintenance
6.1. Battery replacement
6-2. Fuse replacement
6-3. Maintenance
Environmental protection
Symbol indicating separate collection of electrical and electronic equipment waste. Used electrical appliances are
secondary raw materials - they must not be disposed of in household waste, as they contain substances hazardous to
human health and the environment! Please actively help us to manage natural resources and protect the environment by
handing over used equipment to the waste electrical equipment storage point. To reduce the amount of waste disposed of, it
is necessary to reuse, recycle or recover it in another form.
1. GENERAL INFORMATION
The device is intended for use both in private households and for commercial purposes. The HT1E606 Digital Multimeter is an inno-
vative, powerful, reliable, battery-powered, full-featured instrument with AC and DC voltage measurement up to 2000V, contactless
NCV and temperature measurement, with a large LCD screen showing 4000 characters.
The meter is equipped with an overload protection circuit that can be used to measure DC and AC voltage, AC and DC current,
resistance, capacity, frequency, live wires, battery voltage, non-contact NCV detection, diode and circuit continuity.
Any other use is not intended and may lead to property damage or even personal injury. Use the device only in accordance with this
manual. The manufacturer does not assume any liability for damage caused by improper use. The device is not a measuring device
within the meaning of the „Measurement Law”.
2. GENERAL SAFETY CONDITIONS
It is within the scope of the owner and user’s responsibility to read, understand and follow these rules:
IMPORTANT:
Please read this manual carefully. Please pay special attention to the requirements of safe use, warnings and
notices. Use the product correctly and carefully for the purposes for which it is intended. Failure to do so may result in
damage and/or harm to health and will void the warranty. Please keep this manual in a safe place for further use. When
passing the device on to another person, also give them the manual.
• Please use the device only for the purpose intended for the device.
• Please keep the device away from heat, direct sunlight, moisture (under no circumstances immerse in liquid substances) and
sharp edges. Do not operate the device with wet hands.
• Do not leave the device running unattended. Always switch off the unit before leaving the room.
• Check regularly that the device is not damaged. If damage is detected, stop using the device.
• For the safety of children, please do not leave any freely accessible parts of the packaging (plastic bags, cartons, polystyrene, etc.).
WARNING
Don’t let the kids play with the foil. Danger of suffocation!
This device is not intended for use by persons with reduced physical, sensory or mental capabilities or lack of experience and/or
skills, unless such persons are accompanied and supervised by persons responsible for their safety or have received precise instruc-
