15
Adres producenta/ Adresse des Herstellers/ Manufacturer’s Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
4.2. 3. Automatic resistance measurement
Range
Resolution
Accuracy
1000 Ω
0.1 Ω
±(0.8% r 3 digits)
10 kΩ
1 Ω
100 kΩ
10 Ω
1000 kΩ
100 Ω
10 MΩ
1 kΩ
100 MΩ
10 kΩ
± (1.5% r10 digits)
(SMART) resistance
Range
Resolution
Accuracy
6 kΩ
0.1 Ω
± (1.2% r 5 digits)
Overload protection: 250 V.
Idle voltage: 1.5 V.
4.2. 4. Diode test
Function
Range
Resolution
Test conditions
Diode test
0.15V-2.5V
0.001V
Direct current: about 1 mA; voltage in
open circuit: about 2.5 V.
The display shows the approximate
value of the diode voltage drop.
Overload protection: 250 V
4.2. 5 On/Off buzzer
Function
range
Resolution
Introduction
Test conditions
100 Ω
1 Ω
The resistance is not greater than
30Ⅲand the built-in buzzer
produces a continuous sound.
The voltage in an open
circuit is about 1 V.
Overload protection: 250 V.
4.2. 6. Capacitance
Range
Resolution
Accuracy
100 nF
0.01 nF
± (3.5% r 15 digits)
1000 nF
0.1 nF
10 µF
1 nF
100 µF
10 nF
1000 µF
100 nF
10 mF
1 uF
Overload protection: 250V
4.2. 7. Direct current
Range
Resolution
Accuracy
600mA
0.1mA
±(0.8% r 3 digits)
10.00A
10mA
±(1.2% r 3 digits)
Overload protection: mA range fuse (FF630mA / 250V); 10A fuse (FF10A / 250V).
When the measured current is greater than 5A, the continuous measurement time must not exceed 15 seconds and it is neces-
sary to stop the current measurement for 1 minute after the measurement